Blackstone 1923 Manuel D'utilisation page 22

Model 1923 | Owner's Manual |
Be sure to install handle correctly,
with the handle facing down.
18
Assembly Guide
S T E P 2 5
Slide the left side shelf
onto the side shelf brackets. The
threaded M6 step bolts will hook
and hold the shelf.
Use two (2) short M6 step bolts (i.),
to secure the shelf to the griddle
body by screwing them into the
bottom holes of the bracket.
Repeat this step with the right
side shelf.
S T E P 2 6
Attach the drawer handle by first removing the two small
thumb screws from inside the drawer and taking off the front panel of the
drawer. Next, use four (4) M5x15 screws (j.) to attach the drawer handle to the
front panel. Re-attach the front panel with the previously removed thumb
screws. Repeat this step with the other two (2) drawers.
S T E P 2 7
Place the cutting board
onto the right side shelf.
S T E P 2 8
For each of the control
knobs, unscrew the two (2) M3x8
screws to open the base.