How To Operate The Device - Ducati HC 800 Manuel De Montage

812/00 corretto 26-09-2001 9:25 Pagina 29
B: System control equipment.
- Plastic casing with IP44 protection degree, provided with No. 3+2
fairleads.
- Control card 7853 CTR35 model and/or CTR35/S model.
- 40 amp. relays
- 433.92 MHz radio transmitter in compliance with European norms
I.ETS 300 220
- 12 V a.c. power supply input ; 12 V d.c. outputs.
- Double working program: Manual/Automatic.
- Amps safety control system.
- Power supply warning LED.
- Toroidal transformer - CE - 230/120V 50/60 Hz 12V 100W.
C: 433.92 MHz quartz telecontrols in compliance with norms I-ETS
300 220, EEC approvals.
D: Key selector with built-in force-proof system.
E: Blinker:
- Plastic casing with IP44 protection degree provided with fairlead.
- Lamp holder.
- 12V 10W max bulb
F/G/H/L: Adjustable fixation system
I: Unlocking key.
M: Pair of 12V photocells
N: Antenna with cable

1.3 How to operate the device

The pulse is sent to the telecontrol "C" and is received by the
electronic programmer "B" which provides to supply the energy to
motors "A" which drive the gate wings. A second pulse will provide for
the wings closing. By adequatly programming the equipment, one is
able to make the wings close automatically. The blinker "E" will warn
the wings are moving. The system is designed to last many years and
NO MAINTENANCE is needed.
At intervals wash the actuators with water and soap.
The actuator piston rod made of stainless steel has NEVER to be
lubricated.
1.4 Safety advises
Fig. 2
29
Fig. 14 P2