Setting The Temperature - Dometic CLASSIC RH418NTE Instructions De Montage Et De Service

RH418NTE, RH418NTEG
6.2 Using the cooling device
!
WARNING! Suffocation hazard
If children climb into unused cooling devices and close the door behind
them, they can suffocate inside the device.
If you are not going to use the cooling device for a long time, take the fol-
lowing precautionary steps:
• Remove the door.
• Leave the shelves in place so that children cannot easily climb inside.
A
NOTICE! Damage hazard
• Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy the glass containers.
• Ensure that your cooling device is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the cooling device on a firm base.
➤ Connect the connection cable to the AC mains supply.
✓ The cooling device starts cooling the interior.
➤ If you wish to switch the cooling device off, pull out the connection cable.
➤ Clean the interior to make sure it is dry enough.
6.3

Setting the temperature

The cooling device is equipped with an automatic temperature regulation function.
With the optional remote control (fig. 2, page 3) you can adjust the temperature to
four different levels. Three buttons on the remote control the temperature settings.
• Black button (2): Low inside temperature (two different levels possible)
• Yellow button (3): High inside temperature
• Blue button (4): Medium inside temperature
With each press of the buttons on the remote control, the cooling temperature
switches between the possible values. By pressing a button, a red LED illuminates on
the remote control.
EN
Operation
17