Ergon CF3 Pro Carbon Instructions D'installation Et D'utilisation page 45

ERGON BIKE ERGONOMICS 45
EN
Tighten the clamp using torque of between 4 and 5 Nm. Never exceed the
maximum torque of 5 Nm (Fig. D) or the saddle manufactures
recommendations. Pay particular attention to the information about the
compatibility of the Flip Head Saddle Clamp with different rails on page 57.
max. 5 Nm
Fig. C: Position the Flip Head outer clamps and Fig. D: Tighten the clamping screws to 4 - 5 Nm.
loosely tighten the clamping screws.