emerio TFN-114529 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY
1.
Take the rear base and the front base out of the package, match the poles
and holes of the rear base and the front base and join them together.
2.
Put the main body into the assembled base along the locating pole.
3.
After assembling, put the appliance in a suitable place, plug in and
operate according to the manual.
OPERATION
Please press the control panel to choose your desired functions.
1. On/off: Connect the appliance to a suitable power source. Then press
on/off button
now be illuminated. Press the button again to turn off the appliance. The
appliance will be in standby mode.
1) If the unit is turned on at the first time, it will work with the following
presetting:
Speed: low / Mode: normal / Swing: off / Timer: off
2) In standby mode, press on/off button, the unit will resume former settings; except the functions of mode
and timer. But, if you pull out the plug from the socket, the former settings will all be lost.
2. Speed: Press the speed button
Low → Mid → High → Low ... (repeating).
Note: Wind direction can be adjusted up and down by the blade adjuster in the air outlet.
3. Mode: Press the mode button
condition supporting mode → ECO mode → normal ... (Repeating).
1) Normal mode: under this mode, the motor works with the preset speed. You can press the speed button
to choose speed Low /Mid /High.
2) Natural mode: under this mode, the display of
mode program. Generating softer and more comfort air volume, you feel like the wind from the nature.
You can press the speed button to choose Low /Mid /High natural wind.
3) Sleeping mode: under this mode, the display of
mode program. Air volume will weaken with the decrease of body temperature when you fall asleep,
which will protect you from catching cold. You can press the speed button to choose Low /Mid /High
sleeping wind.
4) Air condition supporting mode: under this mode, the display of
and circulate air in the room when working together with your air condition.
5) ECO mode: under this mode, the display of
program. The LED shows the room temperature.
When room temperature is under 25°C, the appliance blows low wind;
When room temperature is between 25°C and 29°C, the appliance blows mid wind;
When room temperature is over 29°C, the appliance blows high wind.
Note: In air condition supporting mode and ECO mode, the speed button is not activated.
to turn the appliance on and the display panel will
to adjust the speed. It will work as below:
to choose the functions from normal →Natural → Sleeping → Air
is on. The appliance runs according to the natural
is on. The appliance runs according to the sleeping
is on. The appliance runs in an energy conservation
- 5 -
is on. The appliance can help adjust

Publicité

Table des Matières
loading

Table des Matières