Dismantling The Equipment / Deactivation Following Operation; Accessory Rail - Lukas STRONGARM e100 Manuel D'utilisation

7.4 Accessory rail

The accessory rail allows the attachment and variable positioning of various lighting units.
The lighting unit is optional and not offered by LUKAS.
Fixing screws
(hex socket head)

8. Dismantling the equipment / deactivation following operation

Once work has been completed, the device arms should be closed until the tips are only a
few millimeters apart. This relieves the hydraulic and mechanical strain on the equipment.
NOTE:
Never store the device with fully closed arms! By fully closing the arms, hydraulic
pressure and mechanical tension may develop in the device.
Clean the device after each operation and grease all metal surfaces as well as all moving
parts. The lock pin (button) of the plug-on tips should also be greased from time to time.
Greasing provides protection against excessive wear and tear as well as corrosion.
Avoid storing the equipment in a damp environment.
66
Accessory rail