Troubleshooting - Dymo LabelManager 260P Guide D'utilisation

Troubleshooting

Review the following possible solutions if you encounter a problem while
using your label maker.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Printing...
Too many characters
Exceeded maximum number of
characters in buffer.
Too many lines
Exceeded maximum number
of lines.
Charge Battery!
Battery pack almost discharged.
26
Solution
• Ensure the label maker is turned on.
• Attach the power adapter to recharge the
battery pack. See Recharging the
Battery Pack.
• Attach the power adapter to recharge the
battery pack. See Recharging the
Battery Pack.
• Clean the print head.
• Ensure the label cassette is installed properly.
• Replace the label cassette.
Clean the cutter blade. See Caring for Your
Label Maker.
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
• Delete a line to fit on the label width.
• Insert a wider label cassette.
Attach the power adapter to recharge the
battery pack. See Recharging the
Battery Pack.