RADSON Digital RF Guide D'utilisation page 20

N°
Names
Upper limit of the floor
temperature.
FLh Only effective if the external
sensor is connected and
07
selected. (FL.1)
Setting temperature for the floor.
FLs Only effective if the parameter 02
is adjusted on (Cb.1 and Cb.2)
Press (OK) on this parameter to exit the parameters menu end come back to the
09 End
main display.
Description Default setting
Default: 35°C
Adjustable: From "FLl" to 45°C
Default: 28°C
Adjustable: From 5°C to 45°C
20
Other possibility