RADSON Digital RF Guide D'utilisation page 11

The comfort temperature will be followed all the time
in accordance with these descriptions:
- Simple installation without main zone
programmer:
The comfort temperature will be followed all the time.
(Default setting 20°C)
- Installation with main zone programmer: (with or
without Heating and Cooling function)
In heating mode: (Winter)
The comfort temperature adjusted on the thermostat
will be followed all the time. (Default setting 20°C)
In cooling mode: (Summer)
You can adjust the comfort setting temperature only
on the main zone programmer
(Check the leaflet of main zone programmer for more
information)
REDUCED operating mode: (Manual mode)
By pressing the keys (-) or (+), the actual reduced
setting temperature is now displayed, then press the
desired key 1 sec to start the increment or
decrement of the setting temperature.
The ambient room temperature reappears after a few
seconds.
Press once on the (OK) to turn on the backlight only
and a second time to change operating the mode.
The reduced temperature will be followed all the time
in accordance with these descriptions:
- Simple installation without main zone
programmer:
The reduced temperature will be followed all the
time. (Default setting 18°C)
- Installation with main zone programmer: (with or
without Heating and Cooling function)
In heating mode: (Winter)
The reduced temperature adjusted on the thermostat
will be followed all the time. (Default setting 18°C)
11