RADSON Digital RF Guide D'utilisation page 17

N°
Names
00 xx.x Software version
01 rF
Radio configuration mode (see the corresponding section)
02 Deg Type of degrees displayed
Selection of the sensor which will
be used for the regulation.
03 Sen The listing of the following
parameters will be different in
function of this parameter.
Description Default setting
°C: Celsius degrees.
°F: Fahrenheit degrees.
Air: ambient sensor only
Flr: External (floor) sensor only.
FL.1: ambient sensor with lower and upper floor
limitation.
FL.2: ambient sensor with intelligent lower floor
limitation.
- The two following parameters must be use
only with the special receiver
Cb.1: Combined function (Ambient and floor
regulation)
Cb.2: Combined function (Ambient and floor
regulation)
Other possibility