Pty Seek Function; Eon Function - Yamaha HTR-5730 Mode D'emploi

RECEIVING RDS STATIONS

PTY SEEK function

If you select the desired program type, the unit
automatically searches all preset RDS stations that are
broadcasting a program of the required type.
1
Press PTY SEEK MODE to set the unit in
PTY SEEK mode.
The program type of the station the unit is currently
receiving , or "NEWS" flashes on the front panel
display.
PTY SEEK
MODE START
2
Press PRESET/TUNING l / h to select the
desired program type.
The selected program type appears on the front panel
display.
PRESET/TUNING
SET MENU
3
Press PTY SEEK START to begin searching
all preset RDS stations.
The selected program type flashes and the "PTY
HOLD" indicator lights up on the front panel display
while the unit is searching for stations.
PTY SEEK
MODE START
• The unit will stop searching if a station that is
broadcasting a program of the required type is
found.
• If the station found is not the desired one, press
PTY SEEK START again. The unit begins
searching for another station that is broadcasting a
program of the same type.
I To cancel this function
Press PTY SEEK MODE twice.
36
This function uses the EON data service on the RDS
station network. If you select the desired program type
(NEWS, INFO, AFFAIRS or SPORT), the unit
automatically searches for all preset RDS stations that are
scheduled to broadcast a program of the required type and
switches from the station being currently received to the
new station when the broadcast starts.
Note
• This function can only be used when an RDS station that
Flashes
1
2
PTY HOLD
Lights up
I To cancel this function
Press EON repeatedly until the program type name
disappears from the front panel display.

EON function

offers the EON data service is being received. When the unit is
tuned to such a station, the "EON" indicator lights up on the
front panel display.
Check that the "EON" indicator lights up on
the front panel display.
If the "EON" indicator does not light up, tune in to
another RDS station so that the "EON" indicator
lights up.
Press EON repeatedly to select the desired
program type (NEWS, INFO, AFFAIRS or
SPORT).
The selected program type name appears on the front
panel display.
EON
• If a preset RDS station of the selected program
type starts broadcasting, the unit will automatically
switch from the program being currently received
to that program. (EON indicator flashes.)
• When broadcasting of the required program ends,
the unit returns to the previous station (or another
program on the same station).