Satellite Broadcasting - Megasat Campingman Portable 2 Mode D'emploi

2. Installation
2.2 Control unit
Main power
USB connection for
Firmware Update
Connection
for antenna
Connection
for TV (set-top box)
Warning:
Connect the device only at a 7 amp protected line.
The line must be at least 2.5 mm² strong. (never directly to the car battery).
06
Satellite selection
Display (up / down) Confirm
LED displays Home position
(PWR = Power) (no function)
(SEARCH = Searc)
(STOW = no function)
(ERR = Error)
Port for Power supply
Service 12 V / 24 V
ENGLISH
2. Installation

2.3 Satellite broadcasting

Direct Broadcast Service (DBS) satellites broadcast audio, video and data information from
satellites located 22.000 miles in space. A receiving station, such as the antenna, should
include a dish and satellite receiver to receive the signals and process them for use by the
consumer audio and video equipment. The system requires a clear view of the satellite to
maximize the signal reception.
Good reception signal
Objects such as tall lighthouse, bridges and big ship that block this view will cause a loss
of signal. The signal will be quickly restored once the antenna has a clear line of sight
again. Heavy rain, cloud, snow or ice may also interfere with the signal reception quality.
If the satellite signal is lost due to blockage or severe weather condition, services from
the receiver will be lost (picture will freeze frame and may disappear). When the satellite
signal strength is again high enough, then the receiver will resume providing desired
programming services.
Bad reception signal
ENGLISH
07