How To Use - Hamilton Beach BM10 Mode D'emploi

How to Use

Before first use:
• Check for any missing or damaged parts.
• Clean all parts according to Care and Cleaning section.
• Set Bread Maker on Bake mode and bake empty for about
10 minutes. Let unit cool down and clean all the detached parts
again. The appliance may emit a little smoke and/or odor when you
turn it on for first time. This is normal and will subside after first or
second use. Make sure appliance has sufficient ventilation.
• Dry all parts thoroughly. The appliance is ready for use.
1. Place Bread Pan into Base and make sure it is firmly locked in
place by turning it clockwise.
2. Push Kneading Paddle onto Drive Shaft inside Bread Pan.
w CAUTION Falling Object Hazard. Bread Maker can wobble
and walk during kneading cycle. Always position it in center of
counter away from edge.
3. Add ingredients to Bread Pan in order listed in recipe (see Figure
1). First, add liquids, sugar, and salt; then flour; and the yeast last.
NOTE: Make sure yeast does not come into contact with salt or
liquids.
Figure 1
LAST: Yeast. MUST be separate
from wet ingredients
SECOND: Dry ingredients
(recommended flour)
FIRST: Liquid and dry ingredients
(milk, juices, egg, sugar, salt,
shortening)
4. Plug into outlet. A beep will be heard and display will default to
Cycle 1.
5. Press MENU button and use Dial until your desired cycle is
displayed.
6. Press LOAF SIZE button and use Dial to move arrow to 1-, 1.5- or
2-lb. loaf size. (Loaf size is an option in Cycles 1, 2, 3, and 9.)
7. Press the CRUST COLOR button and use Dial to move the arrow
to desired setting: Light, Medium, or Dark. (Crust color is an
option in cycles 1, 2, 3, and 9.)
8. If desired, set DELAY/TIMER. (Delay function is available in Cycles
1, 2, 3, 7, 9 and 10 for up to 15 hours.)
NOTE: Do not use this feature when using dairy, eggs, etc.
9. Press START/PAUSE button to begin cycle. Bread Maker will beep
once and the ":" in digital display will begin to flash indicating
timer is counting down. The Kneading Paddle will begin to mix
your ingredients. If Delay was activated, Kneading Paddle will not
mix ingredients until cycle is set to begin.
10. For add-ins (nuts, dried fruits, chopped herbs, etc.) place in Mix-
in Dispenser. Machine will beep 8 times when ingredients are
dispensed. Mix-in Dispenser holds about 1/2 cup.
11. Once baking cycle is complete, machine will beep 10 times and
shift to Warm setting for 1 hour.
7