Displaying Tv Information; Mute Function; Muting Speakers; Muting The Headphones - Telefunken TFX 1646 D 857U Mode D'emploi

Displaying TV Information

Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
"INFO" button is pressed. When you are in DTV Mode
and press " " or " " button, the Information of the
previous or next programme is displayed. To switch to
the displayed, programme just press OK button.

Mute Function

Press " " button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the first
one is pressing the "
is increasing the volume level.

Muting Speakers

The speakers will not mute when the headphones are
plugged in, if you would like to mute the speakers while
listening using headphones press the "Mute" button
and the " " symbol will appear in screen and then
disappear after a few seconds. Please note if you
adjust the TV volume the "Mute" function will turn off
and the speaker sound will come back on.

Muting the Headphones

If you want to mute the headphones while listening using
the speakers, press "Menu" and select "ON" from the
Headphone Mute option under the sound menu.

Picture Mode Selection

By pressing PP button, you can change Picture
Mode settings in accordance with your viewing
requirements. Available options are Dynamic, Natural
and Cinema.
Note: This feature cannot be set while in PC-VGA mode.

Zoom Modes

You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Press " " button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i resolutions,
only 16:9 mode is available.
Zoom mode cannot be changed while in PC-VGA mode.

Auto

When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
" button and the second one
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen
.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size
English - 90 -
.