First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight "First Time
Installation" menu item and press "OK" button, then
you will be asked whether or not to delete the settings.
Selecting "Yes" by pressing "OK" button while "Yes" is
highlighted will delete the existing channel table.
Then you will be asked to confirm for deleting all
channels and settings:
By selecting Yes and pressing the "OK" button, the
existing channel table will be deleted. After factory
settings are loaded, "First Time Installation" menu
will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using " " or " "
buttons, select the desired language option, and press
OK button to activate.
Afterwards, "First time installation" OSD will appear
on the screen. By pressing " " or " " buttons, select
the Country you want to set and press "OK" button
(* only for EU countries).
Press the "OK" button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen.This process is same as described in
Automatic Search section.
Media Browser
• To display Media Browser window, press either "M"
button on the remote control and then select Media
Browser by pressing " " or " " button. Press "OK"
button to continue. Media Browser menu contents
(depending on the contents of your USB drive) will
be displayed.
• Also, when you plug a USB device, the following
screen will be displayed:
Select YES by pressing " " or " " button and press
OK button. Media browser will be displayed.
• You can play music, picture and video files from a
USB memory stick.
Note: If you plug USB stick while in analogue mode, the TV
will automatically switch to digital TV mode.
Note: Some USB compliant devices may not be supported.
Note: If the USB stick is not recognized after power off/on
or First Time Installation, first, plug the USB device out and
power off/on the TV set. Plug the USB device in again.
Playing MP3 Files
Play This (OK button) : Plays the selected file.
Play (Green button) : Plays all media files in the folder
starting with the selected one.
Pause (Yellow button) : Pause playing file.
Stop (Red button) : Stop the playing file.
Previous/Next (Left/Right buttons) : Jumps to previous
or next file to play.
Shuffle (INFO button) : Plays the files randomly. If
shuffle mode is enabled, previous/next function will
also jump to the tracks randomly.
Loop (Blue button) : Plays the selected file repeatedly.
Viewing JPG Files
English - 84 -