Knee Pad Setting - ORTHOSCOOT NH1 Mode D'emploi

Knee pad setting

Please read the following steps carefully and take all the time you need for the setting.
You should definitely try different settings, test-drive and compare before you finally decide upon the setting. In
case you cannot decide between two settings, please always choose the smaller one. An aid which perfectly fits
your needs is essential for an ergonomically correct handling.
At first please open the quick release skewer on the
knee pad clip.
Choose your position and let the securing pin snap
into the desired positioning hole.
38
Position 4:
186 to 200 cm
Body height
Position 3:
171 to 185 cm
Body height
Position 2:
156 to 170 cm
Body height
Position 1:
140 to 155 cm
Body height
By pulling the lock washer, the knee brace can be
removed from its locking and can be shifted vertically.
Close the quick release skewer you opened before.
Now the knee pad has been properly set up and secu-
red.
ORTHOSCOOT NH1
®