Assembly & Installation - PRO-POINT 8796690 Manuel D'utilisateur

V1.0
3. Prevent damage to the leads by observing the following:
3.1 Keep the leads away from heat, oil, sharp edges or
moving parts.
3.2 Place the leads in a position that prevents them from
coming into contact with the tool and from getting
caught by the workpiece. The leads should always stay
behind the tool.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the Identification
Key are included.
IDENTIFICATION KEY
A Adapter Plate
B Handle
C Winch
D Hand Crank
E Wire cable and Hook
F Remote Control (not shown)
G Battery Cables (not shown)
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List. Letter references in parenthesis (A) refer to the
included Identification Key.
Visit www.princessauto.com for more information
5,000 LB 12V DC ELECTRIC WINCH 8796690
9