Power Consumption; Care & Maintenance; Lubrication - PRO-POINT 8796690 Manuel D'utilisateur

V1.0

POWER CONSUMPTION

The winch requires more amps to move a heavier load. Consult
Table 2 to determine the amperage consumption based on the
load's weight.
A snatch block increases a winch's pulling power without an
increase in amperage. Using a snatch block can halve the
power required.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at
all times.
6. Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
Clean the external surfaces with cloth after each use. A soft
toothbrush may be used in hard to reach places.

LUBRICATION

The winch is permanently lubricated and does not require
additional lubrication. The exception is if the winch is
submerged in water. Open the housing, dry and have a
qualified technician re-lubricate the winch.
Visit www.princessauto.com for more information
5,000 LB 12V DC ELECTRIC WINCH 8796690
15