Commissioning And Functions; Operation - Klarstein CHILLOUT Mode D'emploi

EN
18

COMMISSIONING AND FUNCTIONS

Commissioning
1. Insert the mains plug into the socket. The "ICE MAKING " indicator flashes, and the
machine will start the deicing function.
2. Press the POWER button, the "ICE MAKING" indicator light is always on and then
the ice block will be made automatically. After the ice making is completed, the
deicing will be carried out, and then the ice shoveling function will be entered, and
so on.
Operating functions
• ADD WATER: water shortage alarm
When the "ADD WATER" light turns red, it means that there is water shortage in
the water tank. You need to add water and press the power button to restart the
machine.
• ICE FULL: Ice full alarm
When the ice reaches the maximum capacity of the ice storage container, the "ICE
FULL" light flashes, and the machine stops. At this time, the ice needs to be poured
out. When the ice position is lower than the full sensor position, the machine will
restart automatically.
• ICE MAKING: Ice making
When this light is always on, it means that the ice maker is making ice.

OPERATION

Step 1
• Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed
the MAX position. If the water exceeds the maximum scale MAX, you need to open
the bottom drain plug and release the excess water.
• Close the lid again.
Step 2
• Insert the mains plug into the socket and press the power button to start the
machine.
• When the ice basket is full, please take out the ice immediately, do not let the ice
overflow the ice basket.