Operation - Pattfield Ergo Tools PE-AHS 18 Li Traduction De La Notice Originale

Masquer les pouces Voir aussi pour PE-AHS 18 Li:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
If the battery pack fails to charge, check:
whether there is voltage at the socket outlet
whether there is good contact at the charging contacts
If the battery pack still fails to charge, take
the charging unit
and the battery pack
to your Hornbach store.
To ensure that the battery pack provides long ser-
vice, you should take care to recharge it promptly.
You must recharge the battery pack when you notice that the power
of the cordless hedge trim-mer drops. Never fully discharge the batte-
ry pack. This will cause it to develop a defect.

6. Operation

Switching ON/OFF.
The hedge trimmer is equipped with a two-handed safety switch. The
machine works only when the switch on the steady grip (Figure 1 /
GB
Item 3) is pressed with one hand and the switch on the handle (Fi-
gure 1 / Item 4) is pressed with the other hand. If either switch is re-
leased, the cutters will stop moving. Please watch out for the cutters
as they slow down to a standstill.
Notes on working practice
A hedge trimmer can be used to cut shrubs and bushes as well as
hedges.
To obtain the best cutting results, hold the hedge trimmer so that
the cutter teeth are at an angle of approx. 15° in relation to the
hedge (see Figure 7).
The twin-bladed cutters rotate in opposite directions, thus enab-
ling cutting in both directions (see Figure 8).
It is recommended to tie a guide line of string or the like along the
Anl_PE_AHS_18_Li_SPK7.indb 238
Anl_PE_AHS_18_Li_SPK7.indb 238
- 238 -
22.09.2017 12:10:24
22.09.2017 12:10:24

Publicité

Table des Matières
loading

Table des Matières