Panasonic WV-CW484 Série Mode D'emploi page 11

q Power cable (12 V DC or 24 V AC)
Cautions:
Supplies 24 V AC or 12 V DC from an
external power source.
w Video output cable with BNC connec-
tor
Connects with the video connector.
e Enclosure
r Focus lever
Fixes the focus position after adjusting.
t Zoom lever
Fixes the zoom position after adjusting.
y Tilting lock screw
Fixes the tilting position after adjusting.
u Azimuth (Angle adjuster)
Shoots in a straight-angle field of view
when aiming at an object in a slanting
direction even if the tilt angle has been
set.
i Panning table
Adjusts the panning angle of the camera.
o Panning lock screw
Fixes the panning position after adjust-
ing.
!0 Camera lock screw
Fixes the camera and camera attach-
ment.
!1 Monitor output jack (3.5 diam. mini
jack)
Connects the LCD monitor and such
devices with 3.5 diam. 2-pole L-type plug
for checking images.
!2 Optional heater connector (6 pin
female)
When an optional heater unit is installed
in the camera, the harness exiting from
the unit will be connected to this.
!3 LED indicator
Shows the ABF status.
!4 Operation buttons
!5 SET button [(SET), ABF2/MENU]
Activates an item selected in the setup
menu. Refer to p. 18 for details on the
[ABF2] button.
!6 DOWN button [(DOWN), ABF1]
Moves the cursor downward and selects
items in the setup menu.
for details on the [ABF1] function
!7 UP button (UP)
Moves the cursor upward and selects
items in the setup menu.
!8 LEFT button [(LEFT), NEAR]
Moves the cursor to the left, selects the
mode and adjusts some levels.
!9 RIGHT button [(RIGHT), FAR]
Moves the cursor to the right, selects the
mode and adjusts some levels.
Refer to p. 22
11