Hardware Overview; Camera - D-Link mydlink pro DCS-2802KT-EU Mode D'emploi

Section 1 - Product Overview
Sync Button 1
Speaker
1 Sync Button
2 Speaker
3 Built-in Microphone
4 1080p Lens
5 Light Sensor
6 Status LED
7 PIR Detector Window
8 Micro-USB Port
D-Link DCS-2802KT-EU User Manual

Hardware Overview

Front
2
Press to start syncing the camera to the hub. Press to power on the camera from factory off state.
Speaker for the two-way audio feature.
Listens to the environment.
Records 1080p video.
Senses light to determine if night mode should be enabled.
See Camera LED Behavior on page 4.
The PIR motion detector is behind this window. Senses motion to trigger recordings.
Peel back the water-resistant cover and plug the supplied power connector here to charge the camera's
battery. Note: Please only plug in the camera in a dry location.

Camera

3
Built-in Microphone
4 1080p Lens
5 Light Sensor
6 Status LED
7 PIR Detector Window
Micro-USB Port
Back
8
3