Table des Matières
Publicité
Section 2 - Installation
Step 3:
in the top-left corner, select Add New
After logging in, tap the Menu icon
Device and follow the on-screen instructions to connect to your camera.
Bluetooth needs to be enabled on your phone.
Step 4:
When you are asked to scan a QR code, select Yes or No.
If you selected Yes:
Scan the QR code on the back of the hub, then press Next.
If you selected No:
Select the DCS-H100 hub from the list, then press Next.
Select Next and continue to follow the onscreen instructions.
Final Step:
Congratulations, your Wire-Free Camera Kit is now ready to use!
Be sure to check the www.mydlink.com website periodically for the latest
firmware updates to keep your product secure and up to date with the latest
features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the
recessed reset button on the hub for 10 seconds while the device is powered on, making sure
that you see the LEDs turn off.
D-Link DCS-2802KT-EU User Manual
16
Publicité
Table des Matières
