Adding Additional Cameras (Optional) - D-Link mydlink pro DCS-2802KT-EU Mode D'emploi

Section 2 - Installation

Adding Additional Cameras (optional)

Step 1:
in the top-left corner, select Add New Device and follow
Tap the Menu icon
the on-screen instructions to connect to your camera. Bluetooth needs to be
enabled on your phone.
Step 2:
When you are asked to scan a QR code, select Yes or No.
If you selected Yes:
Scan the QR code on the bottom of the the camera, then press Next.
If you selected No:
Select the DCS-2800LH camera from the list, then press Next.
Select Next and continue to follow the onscreen instructions.
Final Step:
Congratulations, your Wire-Free Battery Camera is now ready to use!
Be sure to check the www.mydlink.com website periodically for the latest
firmware updates to keep your product secure and up to date with the latest
features.
Note: If you experience issues registering this camera with your mydlink account, or if you
purchased an open box or resold unit, perform a hard reset by pressing and holding the
recessed reset button on the hub for 10 seconds while the device is powered on, making sure
that you see the LEDs turn off. This will reset the settings of all cameras.
D-Link DCS-2802KT-EU User Manual 17