Mounting The Camera; Wall Mount - D-Link mydlink pro DCS-2802KT-EU Mode D'emploi

Section 2 - Installation
Step 1
Place the mount at the desired location. Use a pencil to mark the holes.
Step 2
Using a 6.35 mm drill bit, drill three 25 mm deep holes over the pencil marks. For a plaster, drywall,
or concrete wall, insert the plastic anchors to support the screws first.
Step 3
Place the baseplate over the holes. Use the supplied screws to attach the baseplate to the wall.
D-Link DCS-2802KT-EU User Manual

Mounting the Camera

Wall Mount

1
2
3
12