auna TT-Pure Mode D'emploi page 24

EN
24
Remarks
Audacity is a free, open-source program. Bigben has no affiliation with the
creators of Audacity and cannot offer any support regarding the software
or be responsible for any effects that it may have on user's computers. For
software enquires, please go to audacity web site for assistance.
PHONO EQ ON / THRU (ON REAR PANEL)
EQ ON
Turn on EQ /THRU (4) on the real panel when amplifier has no phono
inputs.When the turntable TT339 has been using the phono inputs, set the
function off.
THRU
The cartridge signal is output directly through the audio output jacks (L/R).
Turn to THRU ON when connecting to equipment that has phono inputs.
Pitch adjustment
The PITCH ADJUST allows you to tune the playing speed of the record once
the correct speed (33/45 rpm) is chosen. Turn the Pitch Adjust Control (11) to
slightly increase or decrease the speed of the turntable if necessary.
Line Out (R, L): Connection to Amplifier only
• The user can connect the unit with RCA cable (provided) to an external
audio amplifier.
• Connect the "L" & "R" line out jacks to the Aux In jack of the external
audio amplifier.
• Turn on the turntable & the external amplifier. Sound will be produced
by the external amplifier.
Enegy-saving function
In order to save energy, when the unit has no sound output or no button
is pressed for 30 minutes, the unit will be switched to stand-by mode
automatically. It can be switched ON by using the POWER selector again.