auna TT-Pure Mode D'emploi page 18

EN
18
CONNECTIONS
To balance the tone arm and adjust the stylus pressure
1. Put the turntable on a flat surface
2. Release the tone arm holder
3. Lift the tone arm lift lever and turn the tone arm to the left gently.
4. Turn & adjust the counterweight to make the tone arm level. Remove
the stylus cap before adjustment & be careful not to let the stylus touch
the unit
5. Return the tone arm to the original position and lock it.
6. Turn & adjust the stylus pressure ring to let the center line align with 0.
(Do not let the counterweight turn)
7. Turn & adjust the counterweight to let ring scale match the stylus
pressure of the cartridge.
The stylus pressure of cartridge is 3.5 g. Then, turn the counterweight scale
to 4.5 rounds.
Power source
This unit is designed to operate on a normal AC 100V ~ 240 Hz, 50/60Hz
household power supply. Do not attempt to operate the system using
other power sources. This may result in damage to the unit and void your
warranty.