auna TT-Pure Mode D'emploi page 19

GETTING STARTED / OPERATION
Listening to records
1. Make sure to put the unit on flat surface.
2. Press the Power On (2) on back panel. Power indicator (13) will be ON.
3. Place a record on turntable over the central spindle (Place the 45 rpm
adapter over the central spindle when playing 45-rpm record)
4. Set the Speed Selector to 33 or 45 rpm according to the record.
5. Release the tone arm holder (9) & remove the protective cap form the
stylus
6. Lift the tone arm with Tone arm lift lever (8)
7. Move the tone arm to the beginning of the record, or to the start of a
particular track.
8. Gently lower the tone arm onto the record with the Tone arm lift lever (8)
to start playing.
9. To stop manually, lift the tone arm from the Tone arm lift lever and return
it to the tone arm holder. Lock the holder.
10. Auto Stop On/ Off Selector :Set the function: Switch to ON for turntable
auto stop function.
For Speed 33 rpm – Switch to Auto stop "On" position. It enables the
record auto stop when ending.
For Speed 45 rpm – Switch to Auto stop "Off" position. It can play the
whole song.
Note: Do not stop or turn the platter manually. Moving or jarring the
turntable without securing the tone arm clamp could result in damage to the
tone Arm.
11. Replace the protective cap on the stylus when not in use.
EN
19