Simple Steps To Start - Samsung DW60M9990AP Manuel D'utilisation

Simple steps to start

1. Open the door, and then load the dishwasher. Make sure dishes are empty.
2. If applicable, put the dishes in the lower rack. If adding the Zone Booster option, put
the dishes in the left side of the lower rack.
3. Apply detergent to the detergent dispenser. For better results, add rinse aids.
4. Press POWER, and then select a cycle with necessary options (Speed Booster, Sanitize,
etc). Availability of cycles depends on the model.
5. Press START, and then close the door. The dishwasher starts the cycle after draining for
a few seconds.
NOTE
• To change the cycle after it has started, press and hold START for 3 seconds to cancel
the cycle. Then, select a new cycle.
• The default cycle is Normal.
• To resume after you open the door to stop the dishwasher while operating, simply
close the door.
DW9900M_DD68-00196B-03_EN.indd 25
English 25
7/9/2018 6:40:36 PM