vollara SAFE HEARTH Mode D'emploi page 7

OPERATING INSTRUCTIONS
Start and select working mode
Setting room temperature
Turn the heater on by pressing the Power button on the control
panel or by pressing the Power button on the supplied remote
control.
Select power level based on the amount of heating required.
ECO setting is locked at 68°F and cannot be changed.
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Set the temperature to the desired level. The heater will remain on
until the heater thermostat senses the set temperature. The heater
will cycle on and off to maintain the set temperature
7