Pattfield Ergo Tools PE-20 RSB Traduction De La Notice Originale page 63

er tool "live" and could give the operator an
electric shock.
b) Keep hands away from the sawing
range. Do not reach under the work-
piece. Contact with the saw blade can lead
to injuries.
c) Apply the machine to the workpiece
only when switched on. Otherwise there
is danger of kickback when the cutting tool
jams in the workpiece.
d) When sawing, the adjustable foot-
plate must always faces against the
workpiece. The saw blade can become
wedged and lead to loss of control over the
machine.
e) When the cut is completed, switch
off the machine and then pull the saw
blade out of the cut only after it has
come to a standstill. In this manner you
can avoid kickback and can place down the
machine securely.
f) Use only undamaged saw blades that
are in perfect condition. Bent or dull saw
blades can break, negatively influence the
cut, or lead to kickback.
g) Do not brake the saw blade to a stop by
applying side pressure after switching
off. The saw blade can be damaged, break
or cause kickback.
h) Clamp material well. Do not support
the workpiece with your hand or foot.
Do not touch objects or the floor with
the the saw running. Danger of kick-
back.
i) When working with the machine,
always hold it firmly with both hands
and provide for a secure stance. The
power tool is guided more secure with both
hands.
j) Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by
hand or against your body leaves it unsta-
ble and may lead to loss of control.
k) Always wait until the machine has
come to a complete stop before placing
it down. The tool insert can jam and lead
to loss of control over the power tool.
124 EN
ADDITIONAL SAFETY INSTRUCTIONS ON
RISKS DUE TO VIBRATION
a) The declared vibration data represents
the main applications of the tool, but
different uses of the tool or poor main-
tenance can result in different vibration
data. This may significantly increase the
vibration level over the total working period.
b) Additional safety measure shall be taken
to protect the user from effects of vibra-
tion. Maintain the tool and its accessories,
keep hands warm and organize work pat-
terns and periods.
SAFETY INSTRUCTIONS FOR BAT-
TERY
Never use a damaged battery.
1.
Do not open the battery. There is a
2.
risk of a short-circuit.
Protect the battery from heat, e.g.
3.
from continuous exposure to sun-
light, fire, water and humidity. There
is a risk of explosion.
In case of damage and improper
4.
use of the battery, vapours may be
emitted. Ventilate the area and seek
medical help in case of complaints.
The vapours can irritate the respira-
tory system.
Under abusive conditions, liquid
5.
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If liq-
uid contacts eyes, additionally seek
medical help. Liquid ejected from
the battery may cause irritation or
burns.
Use only original batteries with the
6.
voltage indicated on the rating plate
of your electric power tool. If other
batteries are used, e.g. imitations,
reconditioned batteries or third-
party products, there is a risk of
injuries as well as damage caused
by exploding batteries.
The battery voltage must match the
7.
battery charging voltage of the bat-
tery charger. Otherwise there is a
risk of fire and explosion.
Recharge only with the charger
8.
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
Pointed objects, such as nails or
9.
screwdrivers, or external forces
may damage the battery. This may
cause an internal short-circuit and
the battery to burn, smoke, explode
or overheat.
When not in use, keep the battery
10.
away from paper-clips, coins, keys,
nails, screws, or other small metal
objects, that can cause a short-cir-
cuit at the charging contacts.
Used batteries must be disposed of
11.
safely and correctly.
EN 125