Sanus MF209 Mode D'emploi page 6

1
Select TV Hardware and Mount TV Brackets
1-1
Choose screw length and diameter
1-2
Select the hardware configuration
Your TV type will help you determine which hardware configuration to use. Match your type of TV to the suggested
hardware configuration on the next page.
Installation option without spacers (TVs with flat backs).
A.
Installation option using spacers (TVs with obstructed backs or inset mounting holes).
B.
A
6
Hand thread screws into the threaded inserts on
the back of your TV to determine the correct screw
diameter (M4, M6, or M8).
Verify that there are adequate threads to secure the
brackets to the monitor. If you encounter resistance,
stop immediately and contact customer service.
CAUTION:
Avoid potential personal injuries
and property damage! Use the shortest screw and
spacer combination to accomodate your needs. Using
hardware that is too long may damage your monitor's
internal components.
B