Bradley 2902-280000 Manuel D'installation Et D'utilisation page 43

ANNEX
MOUNTING INSTRUCTIONS
• To mount onto wall, be sure there are no hidden electrical circuits or
pipes in the mounting location.
• Place the mounting template (provided) on the wall to mark location
of four mounting screw holes.
• Drill four holes (Fig.1) Ø8 (5/16") diameter and 45mm (1 ¾") depth.
• Take off the residual dust from the holes.
• Insert nylon plugs (provided) into four holes (Fig.2 -3).
• Place base plate on wall (Fig.4).
• Fix the base plate firmly on the wall (Fig.5-6).
MOUNTING ITEMS PROVIDED.
• 4 screw.
• 4 Plug.
• 1 Mounting template.
• 1 Instruction manual.
-41-
www.bradelycorp.com