Danby DAC6010E Guide D'utilisation Et Soins De Propriètaire page 6

INSTALLATION
INSTRUCTIONS (cont'd)
3) Completing the Installation
• Cut the foam (non adhesive) sealing strip to fit the area of the
window sill that the air conditioner will rest on.
• Carefully place the air conditioner into the window with the
"L" shaped mounting bracket (on top)
positioned in front of the upper window sash. The bottom of
the cabinet should be positioned on the "recessed" portion of
the window frame. Pull the window down until it rests just
behind the front flange of the (top) "L" shaped mounting
bracket (See Fig. 5).
• Expand the shutter frames (fully) on each side and secure the
top of the frames to the window sash using one 3/4" screw on
each side and one in the "L" shaped mounting bracket (Fig. 5).
• Secure the shutter clamp on each side of the (lower) shutter
and secure to window sill using one 3/4" screw on each side
(Fig. 5).
• Place the second foam sealing strip to fit the opening between
the inside and outside windows, then attach the safety lock to
the outside window frame using one 3/4" screw (See Fig. 6).
PLEASE NOTE: Window applications come in a variety of
different styles. Therefore, it may be necessary to modify or
improvise your particular installation.
INSTALLATION (cont'd)
5
3/4" screws
Shutter clamps
Safety Lock
3/4" screw
Window sash
"L" Shaped
Mounting
Bracket
Fig. 5
Foam Seal
Fig. 6