Multipoint Function - SilverCrest SFA 40 A1 Mode D'emploi

Multipoint function

The multipoint function allows you to use the hands-free set with two
mobile phones simultaneously . This is useful for users with a private
and a business mobile phone .
♦ The pairing of additional mobile phones is carried out in the
same manner as described in the section "Pairing the hands-
free set with a compatible mobile phone" . Start the pairing
process for each phone with the hands-free set switched off .
If you have paired several mobile phones, the hands-free set will now
have several "known" devices available . This status is a prerequisite
for an active connection between the hands-free set and other
mobile phones . A maximum of 8 mobile phones can be saved as
"known" devices . The number of devices that can be actively linked
to the hands-free set is limited to two .
As soon as one or two of the known devices come into range of the
hands-free set, the connection to the devices is made automatically .
In some cases, you must confirm the connection manually on your
mobile phone . If a third "known" device comes into range of the
hands-free set, the connection to this device will remain blocked until
one of the two active connections is broken or one of the two devices
leaves the transmission range . If the connection of one of the paired
devices is broken, the link becomes free for the third (waiting) device .
If two mobile phones are linked to the hands-free set, different ring
tones are used for incoming calls .
■ 14 │ GB │ IE
SFA 40 A1