Bissell CROSSWAVE 1713 Série Mode D'emploi page 5

Assembly
WARNING
Do not plug in your CrossWave™ until you are familiar with all instructions
and operating procedures.
Your BISSELL CrossWave™ machine comes
in three easy to assemble components and
does not require any tools to assemble. The
unit also comes with a two-piece Easy Clean
Storage Tray.
1
Insert handle
into body of
unit until you
hear a click.
3
Wrap the cord around the quick release
cord wrap and the lower cord wrap.
NOTE:
To easily unwrap the cord for use, just turn the quick release cord wrap downward
to remove the cord from the cord wrap.
• Handle
• Body
• Clean Water Tank
• Storage Tray
• Brush Roll Drying Tray
2
click
Then, on the back of the machine, align
clean water tank with the grooves and
slide tank into place until you hear a click.
4
The Easy Clean Storage Tray consists of
a machine storage tray and a brush roll
drying tray. To assemble the Easy Clean
Storage Tray, align arrows on the storage
tray with the arrows on the brush roll
drying tray and slide into place.
www.BISSELL.com
5