presenting a risk of injury to the cyclist. Cracks, scratches
and discolouration in areas subject to high stress indicate
that the component has exceeded its service life and must
be replaced.
Recommendation : Safe use and safety tips
Before using your power-assisted bicycle, make sure that it is in good
working order. Pay particular attention to the following points:
•
The riding position is comfortable
•
Nuts, screws, clamping levers, the tightening of components
•
The brakes are working properly
•
The handlebar's range of movement is correct, without
excessive play and correctly attached to the stem
•
The wheels are not blocked by anything and the bearings are
properly adjusted
•
The wheels are correctly tightened and attached to the
frame/fork
•
The tyres are in good condition and inflated to the correct
pressure
•
The condition of the wheel rims
•
The pedals are firmly attached to the chain set
•
How the transmission works
•
The reflectors are correctly positioned.
RECOMMENDATION: Every 6 months, your power-
assisted bicycle should be professionally checked to
ensure that it is in correct and safe working order. It is the
responsibility of the user to ensure that all components are
in good working order before use.
Choose a safe place away from traffic to familiarise yourself with your
new bicycle. The assistance can be triggered with force, check that
your handlebar is straight and that the road is clear.
Make sure you are in good health before getting on your bike.
49
EN