Transcend AUTO Guide Rapide page 6

ASSEMBLING YOUR TRANSCEND AUTO
To completely assemble the Transcend Auto:
1. Attach the Universal Hose Adaptor and 6-foot hose to the APAP.
2. Connect the interface (mask) to the patient (open) end of the 6-foot hose.
3. Plug the power supply barrel connector into the APAP with the cord pointed up.
4. Connect the power supply to a power source.
2
4
1
Note: Your Transcend AUTO can also be powered by the
optional Transcend Mobile Power Adaptor or Transcend
Battery Systems.
Note: When power is supplied to the APAP, the yellow light will
flash once followed by three quick flashes of the green LED
light. This sequence indicated power is being supplied to the
device and that it has successfully entered Standby mode.
Note: Do not use a power converter with your Transcend as it
may damage the device. Transcend automatically converts
voltage.
TRANSCEND AUTO QUICK GUIDE
3
• ENGLISH • PAGE 6