Installation; Turning On; Use - Salind 01 4G Notice D'utilisation

Please always observe the manufacturer's
specifications for your vehicle. Compensation
claims due to incorrect connections are hereby
excluded.

1.5 Installation

Please proceed as follows when connecting the
Finder to your car battery. The following figure serves
as a guide.
1. Connect the Salind 01 4G to the cable harness
using the black plug-in function.
2. Connect the device to the battery. Connect
cable with the fuse to (+).
to Minus (-).
Attention! The poles must never be reversed.
Note: When connected to the power supply, the
Salind 01 4G switches on immediately and the LED
lights emit a signal.
1.
Fuse
the red
Connect the black cable
2.
Black
Battery
2.
9-75V
Red
Salind 01 4G by SALIND with Online-Tracking V.1.0 EN
© SALIND UG (haftungsbeschränkt)

1.6 Turning on

After a successful activation you can switch on the
SALIND 01 4G. By connecting the FINDER to the
power supply the device has already been switched
on.
For the initial startup of the Salind 01 4G
uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.

1.7 Use

Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the FINDER to a location of your choice and view the
position of the FINDER using a smartphone, tablet or
PC. Please use our app or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
3
functions.