Scope Of Delivery; Product Graphics; Activation; Startup Operations - Salind 01 4G Notice D'utilisation

Masquer les pouces Voir aussi pour 01 4G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

1.1 Scope of delivery

Included in the delivery:
Salind 01 4G by SALIND
M2M SIM card (is already inserted/ do not
replace)
Cable harness
Velcro fastener with adhesive strip on the back
Note: The latest version of this manual is available
www.salind-gps.de/finder
The SALIND-GPS team wishes you lots of fun with
your Salind 01 4G!

1.2 Product graphics

LED-signals
at:
Salind 01 4G by SALIND with Online-Tracking V.1.0 EN
© SALIND UG (haftungsbeschränkt)

1.3 Activation

Note: To activate you need the device ID. Please
make a note before installing your FINDER.
In order to use SALIND's Salind 01 4G, it must first be
activated online.
To do this, please go to
www.start.finder-portal.com
and follow the instructions.

1.4 Startup operations

Please
observe
connecting the device to the vehicle battery:
SIM card is already in the Salind 01 4G
The Salind 01 4G should not be attached to fuel
lines or other combustible components.
No other components of your vehicle should be
damaged by the attachment.
Installing the Salind 01 4G on the vehicle to power
the device may discharge the vehicle's battery.
Before connecting, check whether your vehicle
has a discharge protection and retrofit it if
necessary. In idle mode, the finder requires
approx. 10-20 mAh.
2
the
following
points
before

Publicité

Table des Matières
loading

Table des Matières