Technical Specifications - Funkwerk MULTI MODE COMPENSER Instructions De Montage

GB Technical specifications

Technical specifications

Operating voltage
Current consumption (at U
Reception
Telephone call (average)
Max. peak current (in the transmitting slot)
Stand by (after 2 hrs. with timer)
Frequency range (Transmissio/Reception)
GSM 900
GSM 1800
UMTS-Band 1 (FDD)
Maximum transmitting power in acc. with mobile : with GSM 900:2 W (33 dBm)
phone-specification at the base of the antenna
Minimum transmitting power in acc. with mobile: with GSM 900: 3,2 mW (5 dBm)
phone-specification at the base of the antenna
Sensitivity in acc. with mobile phone-
specification
Ambient temperature for operation
Attenuation compensation for transmitting
and receiving path
Plug connection on the power supply
HF-plug connection
Housing
Dimensions in mm (L x W x H)
Mass
Cable set provided
Subject to changes in the interests of technical progress; scope of delivery subject to change! All
rights reserved. Copying in full or in part is permitted only with written approval!
= 13V)
B
-22-
: 9 V ... 16 V
: approx. 250 mA
: 260 mA ... 400 mA
: approx. 1,6 A
: < 0,1 mA
: 880 ... 915 MHz, 925 ... 960 MHz
: 1710 ... 1785 MHz, 1805 ... 1880 MHz
: 1920 ... 1980 MHz, 2110 ... 2170 MHz
with GSM 1800:1 W (30 dBm)
with UMTS:0,25 W (24 dBm)
with GSM 1800:
with UMTS: 0,01 µW (-50 dBm)
: with GSM 900:
maintained with a power level £ -102
dBm at base of the antenna
: with GSM 1800:
maintained with a power level £ -100
dBm at base of the antenna
: with UMTS:
maintained with a power level £ -106.7
dBm at base of the antenna
: (-40 ... +70) °C
: GSM 900Per 8 dB
: GSM 1800Per 11,5 dB
: UMTS Band1 Per 13 dB
: Micro Quadlok 4-pin, 1 pin not
used, (Pin 1: 12 V,
Pin3: ignition)
: Double FAKRA connector (coding A)
: Diecast, impervious to HF
: 110 x 84 x 23
: approx. 250 g
: 5,0m + 0,25m RG58 with FME connec-
tors
UMTS/GSM-MMC
1 mW (0 dBm)
Pin 2: ground,