Gas connection
Screw the hose fitting clockwise as shown in the drawing opposite.
The hose must be connected in accordance with the hose manufacturer's instructions, and in
compliance with the standards in force in the country concerned.
Your FORGE ADOUR plancha is configured to work with LPG Butane/Propane liquid Gas
depending on what you requested from your retailer on purchase and purchase and
according to local setting in supply pressure.
The type of Gas to be used is written on the label on the side of your plancha.
The Butane/Propane Gas hoses are equipped with different-sized fittings, and are identified
by different colours. To prevent any risk of damage to the plancha fitting, please refer to
the instructions provided by the hose manufacturer.
Connection of your plancha in the I3+ or I3B/P category (Butane/Propane):
• Use certified pressure regulator complying with standard EN 12864 to be connected to the
gas bottke refer also to national standards specifying pressures to supply the appliances.
• Use a certified flexible hose to connect the plancha; for France refer to standards NFD36-
125 for metallic hoses or XPD36-112 for rubber hose; for the other Countries respect local
Rules and Laws.
The entire length of the rubber hose must be visible and easily accessible.
Comply with the safety instructions for use (e.g. use-by date, etc.) specified by the hose
manufacturer. The hose must not be longer than 1.5 meters.
Each burner is fitted with a thermocouple safety device which cuts off the gas supply to the
burners if the flame goes out unexpectedly.
All maintenance operations requiring the opening of the inner gas supply system must
exclusively be carried out by an authorized repairer. Any attempt to dismantle and modify
the appliance in order to change its technical characteristics may cause accidents for
which the manufacturer accepts no responsibility, and which will make the guarantee null
and void.
Theses planchas are classified as appliances for outdoor use and can be operated only with
liquid gas G30/F31 (butane,propane) being certified for the folluwing categories according
to their Countries :
I3B/P (gas G30/G31 at 28-30 mbar)
I3+ (gas G30 at 28-30 mbar and gas G31 at 37 mbar).
16