Hisense RS677N4BIE Mode D'emploi page 49

20
1. Remove the small lid and fill water from
the inlet of the large lid.
2. Remove the cover of the tank, and then
fill water inside directly.
Warning!
Don't touch other parts of the appliance
when filling water, it may cause the water
leakage.
Dispensing water
1. Make sure the cover of the water tank is
fitted on.
2. Close the fridge door and check the
dispenser.
Receiving Water
You should use the correct cups to receive
water underneath the water dispenser.
Warning!
Don't push the dispenser lever forward
without cup, it may cause the water leak
from the dispenser.
Cleaning
1.Put the water tank out of the door
carefully, and then wash the tank, lid, and
head lightly in water.
2.After you have successfully cleaned the
appliance, you should dry it by natural
drying or using the dryer.
3.If you have used the water dispenser for
many times, the water in the receiving tank
may drop on the floor, which may make
your floor wet, and you should clean the
tank with dry towel regularly before
overflow.