General Safety Precautions - Makita LS1013 Manuel D'instructions

ENGLISH
SPECIFICATIONS
Model
Blade diameter
Hole diameter
Max. Cutting capacities (H x W)
Miter angle
0°
45°
52° (right)
No load speed (RPM)
Laser Type (LS1013L, LS1013FL only)
Dimensions (L x W x H)
Net weight
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific
potential hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working
order.
45° (left)
50 mm x 305 mm
(2" x 12")
(left) 50 mm x 200 mm
(2" x 7-7/8")
(right) 50 mm x 215 mm
(2" x 8-1/2")
-
USA007-3
Bevel angle
0°
91 mm x 305 mm
(3-5/8" x 12")
91 mm x 215 mm
(3-5/8" x 8-1/2")
91 mm x 185 mm
(3-5/8" x 7-1/4")
Wavelength 655 nm, Maximum output
LS1013/ LS1013F.......715 mm x 520 mm x 625 mm
LS1013L/LS1013FL.......715 mm x 520 mm x 640 mm
LS1013: 22.4 kg (49.4 lbs), LS1013F: 22.6 kg (49.8 lbs)
LS1013L: 23.2 kg (51.1 lbs), LS1013FL: 23.4 kg (51.6 lbs)
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
5. DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
2
LS1013 /LS1013F/ LS1013L/LS1013FL
255 mm (10")
15.88 mm (5/8")
45° (right)
31 mm x 305 mm
(1-1/4" x 12")
31 mm x 215 mm
(1-1/4" x 8-1/2")
-
1mW (Laser Class II)
(28" x 20-1/2" x 24-5/8")
(28" x 20-1/2" x 25-1/4")
3,700/min.