Sound Settings Menu; Adjusting The Treble, Bass And Left/Right Balance And Audio Input Select; Setting The Allocation Of The Audio Connectors; Screen Settings Menu - Pioneer PDP-615EX Mode D'emploi

SOUND Settings Menu

Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
On "BASS" of "SOUND" menu, adjust the bass.
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
HDMI INPUT
SEL.
Note : If "CAN NOT ADJUST" appears...
Set "AUDIO INPUT" on the SOUND menu correctly.
Information
SOUND settings menu
BASS: Controls the level of low frequency sound.
TREBLE: Controls the level of high frequency sound.
BALANCE: Controls the balance of the left and right
channels.

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting "AUDIO INPUT1" to "VIDEO 2"
On "AUDIO INPUT1" of "SOUND" menu, select
"VIDEO2".
The available sources depend on the settings of input.
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
HDMI INPUT
SEL.
Information
AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
HDMI INPUT
ON: Enables the digital audio input signal transmitted
via the HDMI terminal.
OFF: Disables the digital audio input signal.
18
En
SOUND
: VIDEO1
: COMPNT1
: PC1DSUB
: ON
ADJ. EXIT RETURN
SOUND
: VIDEO2
: COMPNT1
: PC1DSUB
: ON
ADJ. EXIT RETURN

SCREEN Settings Menu

Adjusting the Position, Size, PHASE, CLOCK

The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the normal
mode
On "V.POSITION" of "SCREEN" menu, adjust the position.
The mode switches as follows each time the
pressed:
4:3 ↔ FULL
* The mode can also be switched by pressing the SCREEN
SIZE button on the remote control.
* The settings on the SCREEN menu are not preset at the
factory.
SCREEN
SCREEN SIZE : 4 : 3
V.POSITION
H.POSITION
V.SIZE
H.SIZE
AUTO PICTURE : OFF
PHASE
CLOCK
SEL. ADJ. EXIT RETURN
Information
When "AUTO PICTURE" is "OFF"
SCREEN
SCREEN SIZE
V.POSITION
H.POSITION
V.SIZE
H.SIZE
AUTO PICTURE
PHASE
CLOCK
SEL. ADJ.
When Auto Picture is off, the PHASE and the CLOCK
items are displayed so that you can adjust them.
Adjusting the Auto Picture
ON: The CLOCK, PHASE and Position adjustments
are made automatically.
Not available for digital ZOOM.
OFF: The CLOCK, PHASE and Position adjustments
are made manually.
* If PHASE can't be adjusted, set Auto Picture to OFF
and adjust manually.
Adjusting the position of the image
V.POSITION: Adjusts the vertical position of the
image.
H.POSITION: Adjusts the horizontal position of the
image.
V.SIZE: Adjusts the vertical size of the image. (Except
for WIDE mode)
H.SIZE: Adjusts the horizontal size of the image.
(Except for WIDE mode)
PHASE*: Adjusts for flickering.
CLOCK*: Adjusts for striped patterns on the image.
* The CLOCK and PHASE features are available only
when the "Auto Picture" is off.
* The AUTO PICTURE, PHASE and CLOCK are
available only for RGB signals.
But, these features are not available for moving pictures
on RGB, VIDEO or COMPONENT.
or button is
V.POSITION
-30
: FULL
: OFF
EXIT RETURN