Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADD TITLE: FAN SPEED
ºC.
ºC.
A. Use the mode key to guide you to the AUX icon.
Set Temperature
Set Temperature
B. Look at the LCD screen on the transmitter to verify that a ºC or ºF
B. Look at the LCD screen on the transmitter to verify that a ºC or ºF
B. Pressing the up arrow key will activate the Night Light™.
If the appliance is equipped with a hot air circulating fan, the speed of
child lock
is visible to the right of the room temperature display.
is visible to the right of the room temperature display.
the fan can be controlled by the remote system. The fan speed can be
C. Pressing the down arrow key will turn the Night Light™ off. A single
adjusted through six (6) speeds.
"beep" will confi rm the reception of the command.
ADD TITLE: FLAME HEIGHT
ADD TITLE: FLAME HEIGHT
3.3
flame height
A. Use the mode key to guide you to the fan control icon.
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the
B. Use the up/down arrow keys to turn on/off or adjust the fan
down arrow key once and it will reduce the fl ame height by one step until the fl ame is turned off.
down arrow key once and it will reduce the fl ame height by one step until the fl ame is turned off.
speed. A single "beep" will confi rm reception of the command.
The up arrow key will increase the fl ame height each time it is pressed. If the up arrow key is pressed while
The up arrow key will increase the fl ame height each time it is pressed. If the up arrow key is pressed while
child lock
the system is on but the fl ame is off, the fl ame will come on at the high position. A single "beep" will confi rm
the system is on but the fl ame is off, the fl ame will come on at the high position. A single "beep" will confi rm
note:
ADD TITLE: Night Light Dimmer Control
reception of the command.
reception of the command.
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
If equipped, the auxiliary function controls the Night Light™ with dimmable
burner has been turned on and remain on twelve minutes after it has been turned off.
control.
OFF
OFF
ADD TITLE: CHILD PROOF FUNCTION
A. Use the mode key to guide you to the Night Light™ icon.
This function will lock the keys to avoid unsupervised operation.
B. The intensity of the output can be adjusted through 6 levels.
Use the up/down arrow keys to adjust the output level. A single beep
A. Press the mode and up keys at the same time.
will confi rm reception of the command.
B. To de-activate this function, press the mode and up keys at the same time.
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
ADD TITLE: FAN SPEED
ADD TITLE: FAN SPEED
3.4
blower speed (if equipped)
A. When the transmitter is in the off position, use the mode key to guide
ADD TITLE: NIGHT LIGHT
you to the CPI mode icon.
If the appliance is equipped with a hot air circulating fan, the speed of
If the appliance is equipped with a hot air circulating fan, the speed of
The auxiliary function controls the AUX power outlet on the control module
child lock
child lock
B. Press the up/down to switch between IPI and CPI modes. A single
the fan can be controlled by the remote system. The fan speed can be
the fan can be controlled by the remote system. The fan speed can be
which controls the Night Light™.
adjusted through six (6) speeds.
adjusted through six (6) speeds.
beep will confi rm reception of the command.
A. Use the mode key to guide you to the AUX icon.
A. Use the mode key to guide you to the fan control icon.
note:
A. Use the mode key to guide you to the fan control icon.
B. Pressing the up arrow key will activate the Night Light™.
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
B. Use the up/down arrow keys to turn on/off or adjust the fan
B. Use the up/down arrow keys to turn on/off or adjust the fan
to CPI position to enable remote CPI operation. If the switch is set to IPI
C. Pressing the down arrow key will turn the Night Light™ off. A single
speed. A single "beep" will confi rm reception of the command.
speed. A single "beep" will confi rm reception of the command.
then it will only work in IPI regardless of what is set on the remote control
"beep" will confi rm the reception of the command.
handset.
note:
note:
ADD TITLE: LOW BATTERY / MANUAL BYPASS
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
burner has been turned on and remain on twelve minutes after it has been turned off.
burner has been turned on and remain on twelve minutes after it has been turned off.
The life span of the remote batteries depends on various factors: quality of the batteries,
the number of ignitions, etc.
child lock
ADD TITLE: CHILD PROOF FUNCTION
ADD TITLE: CHILD PROOF FUNCTION
3.5
night light dimmer control
When the transmitter batteries are low, a battery icon will appear on the LCD display
ADD TITLE: Night Light Dimmer Control
before all battery power is lost. When the batteries are replaced, this icon will disappear.
This function will lock the keys to avoid unsupervised operation.
This function will lock the keys to avoid unsupervised operation.
If equipped, the auxiliary function controls the Night Light™ with dimmable
A. Press the mode and up keys at the same time.
When the receiver batteries are low, no "beep" will be emitted from the receiver when
A. Press the mode and up keys at the same time.
control.
it receives an on/off command. This in an alert for the receiver that there's low battery.
B. To de-activate this function, press the mode and up keys at the same time.
B. To de-activate this function, press the mode and up keys at the same time.
A. Use the mode key to guide you to the Night Light™ icon.
When the batteries are replaced the "beep" will be emitted from the receiver when the on/off key is pressed.
B. The intensity of the output can be adjusted through 6 levels.
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the
ADD TITLE: NIGHT LIGHT
ADD TITLE: NIGHT LIGHT
Use the up/down arrow keys to adjust the output level. A single beep
three position slider switch on the receiver to the on position. This will bypass the remote control feature and the
The auxiliary function controls the AUX power outlet on the control module
The auxiliary function controls the AUX power outlet on the control module
will confi rm reception of the command.
appliance main burner will come on if the gas valve is in the on position.
which controls the Night Light™.
which controls the Night Light™.
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
3.6
in the event of a power failure
ADD TITLE: IN THE EVENT OF A POWER FAILURE
A. Use the mode key to guide you to the AUX icon.
A. Use the mode key to guide you to the AUX icon.
A. When the transmitter is in the off position, use the mode key to guide
If the receiver is equipped with batteries they will enable fl ame height control or on/off function to control the
you to the CPI mode icon.
B. Pressing the up arrow key will activate the Night Light™.
B. Pressing the up arrow key will activate the Night Light™.
appliance during a power failure. Blower and Night Light™ operation is not possible. Refer to "appliance
B. Press the up/down to switch between IPI and CPI modes. A single
C. Pressing the down arrow key will turn the Night Light™ off. A single
C. Pressing the down arrow key will turn the Night Light™ off. A single
operation" section when communications between receiver and transmitter have been lost. The receiver will
beep will confi rm reception of the command.
"beep" will confi rm the reception of the command.
"beep" will confi rm the reception of the command.
emit a "beep" sound to confi rm programming has been successful once power is restored. During a power
note:
failure, if the appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
occurs and then turned on, the fl ame height will come on at "Hi". The fl ame height can then be controlled by the
to CPI position to enable remote CPI operation. If the switch is set to IPI
remote.
then it will only work in IPI regardless of what is set on the remote control
handset.
child lock
child lock
ADD TITLE: Night Light Dimmer Control
ADD TITLE: Night Light Dimmer Control
ADD TITLE: LOW BATTERY / MANUAL BYPASS
If equipped, the auxiliary function controls the Night Light™ with dimmable
If equipped, the auxiliary function controls the Night Light™ with dimmable
The life span of the remote batteries depends on various factors: quality of the batteries,
control.
control.
the number of ignitions, etc.
A. Use the mode key to guide you to the Night Light™ icon.
A. Use the mode key to guide you to the Night Light™ icon.
When the transmitter batteries are low, a battery icon will appear on the LCD display
before all battery power is lost. When the batteries are replaced, this icon will disappear.
B. The intensity of the output can be adjusted through 6 levels.
B. The intensity of the output can be adjusted through 6 levels.
Use the up/down arrow keys to adjust the output level. A single beep
Use the up/down arrow keys to adjust the output level. A single beep
When the receiver batteries are low, no "beep" will be emitted from the receiver when
will confi rm reception of the command.
will confi rm reception of the command.
it receives an on/off command. This in an alert for the receiver that there's low battery.
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
When the batteries are replaced the "beep" will be emitted from the receiver when the on/off key is pressed.
A. When the transmitter is in the off position, use the mode key to guide
A. When the transmitter is in the off position, use the mode key to guide
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the
you to the CPI mode icon.
you to the CPI mode icon.
three position slider switch on the receiver to the on position. This will bypass the remote control feature and the
appliance main burner will come on if the gas valve is in the on position.
B. Press the up/down to switch between IPI and CPI modes. A single
B. Press the up/down to switch between IPI and CPI modes. A single
beep will confi rm reception of the command.
beep will confi rm reception of the command.
ADD TITLE: IN THE EVENT OF A POWER FAILURE
note:
note:
If the receiver is equipped with batteries they will enable fl ame height control or on/off function to control the
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
appliance during a power failure. Blower and Night Light™ operation is not possible. Refer to "appliance
to CPI position to enable remote CPI operation. If the switch is set to IPI
to CPI position to enable remote CPI operation. If the switch is set to IPI
operation" section when communications between receiver and transmitter have been lost. The receiver will
76
68
76
OFF
°F
76
76
°F
°F
Set Temperature
SMART
SMART
Room Temperature
76
Room Temperature
Flame Off
68
SMART
ON
76
Blue LCD Display
Blue LCD Display
68
73
ON
°F
On / Off Key
On / Off Key
Temperature Key
Temperature Key
MAX
MAX
Up / Down Arrow Key
Up / Down Arrow Key
76
76
76
76
Set Temperature
MAX
Set Temperature
°F
°F
Mode Key
Mode Key
76
76
73
SMART
Room Temperature
OFF
SMART
73
73
68
°F
°F
ON
Flame Off
Flame Off
Flame at level 1
Flame at level 1
Flame Off
76
76
MAX
°F
°F
MAX
Set Temperature
Room Temperature
76
73
76
68
child lock
ON
°F
OFF
SMART
OFF
Room Temperature
Room Temperature
76
76
68
68
ON
ON
Set Temperature
Flame Off
MAX
Room Temperature
Flame Off
SMART
76
76
68
73
child lock
ON
Set Temperature
Set Temperature
OFF
73
76
76
73
73
°F
73
SMART
SMART
°F
MAX
Set Temperature
76
Flame Off
Room Temperature
OFF
SMART
68
MAX
MAX
child lock
ON
Room Temperature
Room Temperature
73
73
Room Temperature
76
76
68
68
ON
ON
°F
°F
Room Temperature
68
Flame Off
ON
OFF
OFF
MAX
Set Temperature
68
76
ON
child lock
OFF
Set Temperature
Set Temperature
SMART
Set Temperature
Room Temperature
Flame Off
Flame Off
Room Temperature
SMART
SMART
76
76
68
73
68
Set Temperature
73
ON
ON
°F
Flame Off
SMART
MAX
SMART
76
child lock
MAX
MAX
Set Temperature
Set Temperature
OFF
73
76
76
73
SMART
SMART
Room Temperature
Room Temperature
OFF
OFF
MAX
68
68
ON
ON
76
MAX
Flame Off
76
OFF
Flame Off
Flame Off
MAX
MAX
OFF
child lock
Set Temperature
Set Temperature
76
76
Room Temperature
child lock
child lock
OFF
OFF
Room Temperature
68
ON
SMART
SMART
Flame Off
ON
Flame Off
76
OFF ON
76
76
76
On / Off Key
°F
°F
°F
IPI
OFF
OFF
Temperature Key
Up / Down Arrow Key
remote control layout
Mode Key
OFF
76
Flame at level 1
Flame at level 5
Blue LCD Display
°F
76
°F
OFF
On / Off Key
°F
OFF
OFF
23
°C
IPI
°F
Temperature Key
child lock
Up / Down Arrow Key
Mode Key
76
76
°F
°F
OFF
°F
°F
Set Temperature
Set Temperature
OFF
76
76
23
Set Temperature
Set Temperature
°F
°F
Blue LCD Display
child lock
°F
°F
°C
°F
On / Off Key
76
child lock
child lock
23
23
°F
Temperature Key
°C
°C
child lock
Up / Down Arrow Key
Flame at level 5
Flame at level 5
Mode Key
76
76
Flame at level 1
°F
°F
IPI
IPI
76
76
OFF
76
°F
23
°F
°F
76
°F
°F
°C
68
68
76
°F
Blue LCD Display
Blue LCD Display
°F
On / Off Key
On / Off Key
OFF
OFF
Blue LCD Display
Blue LCD Display
Blue LCD Display
Temperature Key
°F
°F
Temperature Key
OFF
OFF
On / Off Key
On / Off Key
On / Off Key
Up / Down Arrow Key
Up / Down Arrow Key
Temperature Key
Temperature Key
Temperature Key
Flame at level 1
child lock
child lock
Mode Key
Up / Down Arrow Key
Up / Down Arrow Key
Up / Down Arrow Key
76
76
Mode Key
Flame at level 1
Flame at level 5
°F
76
°F
Mode Key
Mode Key
76
°F
Mode Key
23
°F
°F
OFF
°F
°C
OFF
°F
23
23
23
°C
child lock
Blue LCD Display
Blue LCD Display
child lock
°F
°C
°F
°C
°F
°F
23
On / Off Key
On / Off Key
child lock
child lock
°C
child lock
child lock
Temperature Key
Temperature Key
child lock
child lock
Up / Down Arrow Key
Up / Down Arrow Key
76
Flame at level 1
76
°F
°F
°F
76
Mode Key
Mode Key
76
°F
°F
76
76
23
23
76
76
76
°F
°F
°F
°C
°F
°C
°F
°F
Blue LCD Display
Blue LCD Display
°F
Flame at level 1
76
On / Off Key
On / Off Key
°F
76
Temperature Key
Temperature Key
76
°F
°F
°F
Up / Down Arrow Key
Up / Down Arrow Key
76
Blue LCD Display
°F
Mode Key
Mode Key
On / Off Key
76
76
Blue LCD Display
Flame at level 1
Flame at level 1
Flame at level 5
Flame at level 5
76
76
°F
°F
Temperature Key
On / Off Key
°F
°F
23
23
76
Up / Down Arrow Key
°F
°C
°C
IPI
°F
IPI
°F
Temperature Key
Flame at level 1
°F
76
Up / Down Arrow Key
76
Mode Key
°F
°F
76
Mode Key
°F
°F
23
76
76
76
76
°F
°C
°F
°F
°F
°F
°F
°F
23
76
76
°F
°C
°F
°F
76
Flame at level 1
°F
°F
76
76
°F
°F
°F
Flame at level 1
Flame at level 1
76
76
76
76
°F
°F
°F
°F
°F
°F
76
76
76
Blue LCD Display
Blue LCD Display
°F
°F
°F
76
On / Off Key
On / Off Key
Flame at level 1
Blue LCD Display
Blue LCD Display
°F
Temperature Key
Temperature Key
On / Off Key
On / Off Key
Flame at level 1
°F
Up / Down Arrow Key
Up / Down Arrow Key
73
73
23
23
76
76
76
76
76
76
76
Hi
°F
°F
°F
OFF
CPI
76
76
MAX
°F
MAX
76
76
76
76
68
Hi
MAX
76
76
°F
MAX
°F
°F
OFF
76
68
Hi
76
76
Room Temperature
Room Temperature
76
76
76
76
°F
76
Room Temperature
Room Temperature
°F
76
Room Temperature
Room Temperature
76
76
76
76
OFF
Flame Off
ON
Flame at level 1
°F
76
76
°F
°F
Flame at "Hi" level 6
76
76
°F
68
68
Room Temperature
Room Temperature
°F
ON
ON
OFF
°F
°F
76
76
°F
°F
76
76
76
Room Temperature
Room Temperature
ON
ON
68
68
68
68
ON
ON
OFF
ON
ON
76
76
°F
°F
CPI
68
68
°F
°F
ON
ON
68
68
ON
ON
Set Temperature
Set Temperature
Flame Off
Flame at level 1
76
76
76
76
76
76
76
°F
76
°F
76
Flame Off
Flame Off
76
Flame at level 1
76
76
°F
°F
°F
Set Temperature
Set Temperature
76
°F
76
°F
°F
°F
Flame Off
SMART
SMART
Hi
Hi
76
°F
76
68
76
76
76
Hi
76
Set Temperature
Set Temperature
OFF
ON
°F
76
76
°F
°F
°F
76
76
76
Hi
°F
°F
76
76
SMART
SMART
76
76
SMART
SMART
°F
°F
SMART
SMART
SMART
SMART
MAX
MAX
76
76
Flame at "Hi" level 6
Flame at "Hi" level 6
76
76
76
76
°F
76
76
76
Flame at level 5
Flame at "Hi" level 6
68
°F
Hi
°F
°F
°F
76
76
°F
76
76
CPI
CPI
OFF
OFF
°F
76
76
°F
76
76
MAX
MAX
76
76
76
76
76
IPI
CPI
°F
°F
MAX
MAX
°F
76
°F
76
°F
Hi
Hi
MAX
MAX
76
76
76
76
OFF
ON
OFF
Hi
°F
76
MAX
MAX
°F
°F
76
76
76
76
76
76
°F
Hi
76
76
76
76
°F
°F
OFF
°F
°F
76
76
OFF
Flame Off
Flame Off
ON
ON
Flame at level 1
Flame at level 1
OFF
°F
°F
°F
°F
OFF
OFF
76
76
76
76
76
76
OFF
OFF
°F
°F
°F
°F
Flame at level 5
OFF
Flame at "Hi" level 6
68
Hi
76
76
76
°F
Flame at "Hi" level 6
°F
76
Flame Off
IPI
CPI
Flame at level 1
Flame Off
Flame at level 1
76
76
76
76
76
76
76
76
76
76
°F
°F
°F
°F
Flame Off
Flame Off
Flame Off
Flame Off
76
76
Flame at level 1
Flame at level 1
76
°F
°F
IPI
CPI
76
76
76
76
Hi
°F
°F
Flame Off
Flame Off
°F
°F
76
76
76
76
OFF
ON
ON
OFF
°F
°F
76
76
76
76
°F
76
76
OFF
°F
76
76
Flame at level 5
68
Flame at "Hi" level 6
Hi
°F
76
76
76
76
76
76
76
Hi
°F
°F
°F
°F
IPI
76
76
CPI
68
68
Hi
Hi
68
°F
76
°F
°F
76
76
76
76
68
76
76
76
76
°F
°F
OFF
OFF
ON
ON
°F
°F
Flame at level 5
Flame at "Hi" level 6
Hi
Hi
76
76
76
76
°F
°F
76
76
76
OFF
IPI
CPI
°F
°F
76
76
76
76
76
76
76
76
OFF
°F
Hi
°F
76
°F
°F
OFF
OFF
68
68
Hi
Hi
76
°F
76
76
OFF
°F
Flame at "Hi" level 6
Flame at "Hi" level 6
°F
°F
OFF
76
76
76
76
76
°F
°F
°F
OFF
CPI
CPI
Flame at level 5
Flame at "Hi" level 6
76
76
°F
76
IPI
CPI
76
76
76
76
76
76
°F
°F
°F
76
76
76
76
76
OFF
OFF
Hi
°F
°F
76
76
76
76
68
68
Hi
Hi
°F
°F
Hi
Hi
76
Flame at level 5
Flame at "Hi" level 6
°F
76
76
76
76
°F
°F
°F
IPI
CPI
Flame at level 5
Flame at level 5
Flame at "Hi" level 6
Flame at "Hi" level 6
68
76
76
76
76
76
76
76
76
76
°F
°F
°F
°F
76
76
°F
76
76
76
76
OFF
OFF
IPI
IPI
CPI
CPI
68
°F
°F
°F
°F
OFF
OFF
Hi
Hi
76
76
°F
°F
Flame at level 5
Flame at "Hi" level 6
W415-2767 / B / 07.06.21
76
23.3
Flame at level 5
Flame at "Hi" level 6
°F
76
76
76
7
7
°F
68
68
7
°F
68
68
°F
7
7
EN
°F
76
7
°F
°F
68
68
76
Flame at level 5
°F
°F
76
°F
°F
°F
°F
°F
IPI
°F
°F
76
76
Flame at le
OFF
OFF
7
7
°F
°F
Flame at level 1
Flame at le
OF
OF
IP
7
7
°F
Flame at level 1
°F
°F
OF
OF
IP
°F
°F
°F
°F
°F
°F
76
76
°F
°F
°F
°F
°F
°F
°F
76
°F
°F
°F
°F
°F
76
7
ON
°F
76
°F
°F
76
76
°F
76
7
°F
°F
ON
°F
°F
76
76
Flame at level 5
Flame at level 5
°F
°F
°F
°F
76
76
IPI
IPI
°F
°F
°F
Flame at leve
Flame at lev
°F
7
7
°F
°F
°F
Flame at level 1
°F
Flame at level 1
Flame at leve
Flame at lev
IP
IP
7
7
°F
Flame at level 1
Flame at level 1
°F
°F
IP
IP
°F
°F
°F
°F
°F
°F
°F
76
°F
°F
°F
°F
Hi
76
°F
Hi
°F
°F
°F
°F
°F
°F
76
°F
°F
ON
°F
°F
76
°F
°F
76
°F
ON
°F
76
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
76
°F
76
76
Hi
°F
°F
°F
Hi
76
Hi
°F
°F
°F
°F
76
76
°F
Hi
°F
°F
°F
°F
ON
ON
76
76
°F
°F
15
76
°F
Publicité
Chapitres
Table des Matières
Dépannage
