Pump Performance; Maintenance; Cleaning The Unit - Pond Boss 52595 Instructions D'utilisation

Step 6. Use a knife to cut 3 pieces of tether Line, line
length depends on your lake size, attach one side of
each line to one of the three loops.
Step 7. Place the fountain into the water and tether
it with supplied line and ground anchors into desired
location.
Step 8. Plug pump and transformer
into GFCI rated outlet.
Step 9. This floating fountain uses
a dusk to dawn sensor. At night, the
lights will automatically turn on; at
sunrise, the lights will automatically
turn off. Make sure the sensor is not
covered by dirt or debris.

PUMP PERFORMANCE

Pump Specifications
Max Flow Rate
2300 GPH at 0 ft. height
Power Consumption
130 watts / 1.5 amps

MAINTENANCE

To maximize the performance of the floating fountain, periodically disassemble to
clean dirt and debris. When you notice a reduced flow from the fountain, this is a good
indicator that it is time to clean the fountain.

CLEANING THE UNIT

Step 1. Before cleaning, always disconnect from the power
source and remove the floating fountain from the water.
Step 2. Remove nozzle from the fountain and clean in
warm, soapy water.
Step 3. Clean lights with a soft brush and non abrasive
cleaner.
6
VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
ground
anchor
Pump Specifications
Max Flow Rate
5000 GPH at 0 ft. height
Power Consumption
230 watts / 2.5 amps
6
7
line
1