Accessories; Base Plate - RIB NORMAL Mode D'emploi

ACCESSORIES

For the connections and the technical data of the optional equipments follow the relevant handbooks.
TELESCOPIC OCTAGONAL BOOM ARM, 6 m
Telescopic octagonal boom arm and fixing hub L = 3 + 3 m.
HANGING RACK
L = 2 m
L = 3 m
WARNING: Not to use in windy areas.
N.B. It is obligatory to install an Hanging support ACG8285 or one Fork type support column
ACG9130G.
Maximum 200 daily cycles
Ø 100 mm BOOM ARM
Ø 100 mm boom arm thickness 2 mm need fixing hub L = 6 m.
NOTE: when ordering, the special balance springs should be required (CME8100 for balance
spring Ø 5,5 and CME8068 for balance spring Ø 6).
L = 6 m
ACG8497
STICKERS FOR OCTAGONAL BOOM ARMS
12 pieces.
code ACG8513
code ACG8290
code ACG8291
code ACG8497
Boom 0 cm
code ACG8527
TELESCOPIC OCTAGONAL BOOM ARM, 7 m
Telescopic octagonal boom arm and fixing hub L = 4 + 3 m.
FIXING HUB
Fixing hub for telescopic octagonal boom arm
FIXING HUB
Fixing hub for ø 100 mm boom arm

BASE PLATE

Base plate.
STICKERS FOR Ø 100 BOOM ARM
39
12 pieces.
G
B
code ACG8514
code ACG8564G
code ACG8539G
code ACG8110
code ACG8526