Vollrath JT2HC Manuel D'utilisation page 2

SET UP
Install the Collection Pan
1. Place the toaster on a hard, flat, stable surface.
2. Turn the toaster on it's side with the bottom facing you.
3. Install the collection pan by placing the back edge of the pan on the
lip at the back of the toaster. Line up the hole in the pan with the
screw. Tighten the screw to secure the collection pan.
Install the Feed Ramp
1. Position the tray so that the opening lines up with the studs.
2. Rest tray on studs in desired location.
2 Convertible Conveyor Toasters, 300-900 Slices Per Hour* Operator's Manual - Models JT2HC and JT3HC
FEATURES
C
B
A
Front View
Back View
A Power Knob
Full Power - maximum heat
Off
Standby - reduces electrical consumption by 75%.
B Conveyor Speed Control Knob
C Unload Tray/Back Panel
D Heat Shield
E Feed Ramp
F Crumb Tray
G Top Heat Control Knob
H Bottom Heat Control Knob
I Collection Pan
J Reset Button (Reference only. Access is via the front of the
toasters. See page 5.)
D
E
F
G
H
I
J