Télécharger Imprimer la page

Vollrath Salamandres JW1 Manuel D'utilisation

20 et 26 pouces 51 et 66 cm

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment
• Plug only into grounded electrical outlets matching the voltage on
the rating plate.
• Use this equipment in a flat, level position.
• Unplug equipment and let it cool before cleaning or moving.
Equipment remains hot after it is turned off.
• Unplug when not in use.
• Keep equipment and power cord away from open flames, electric
burners or excessive heat.
• Do not operate unattended.
• Closely supervise equipment operating in public areas and/or
around children.
• Do not operate if equipment has been damaged or is malfunctioning.
FUNCTION AND PURPOSE
This equipment is intended to melt cheese or warm plates in medium
volume food service operations and restaurants. It is not intended to
bake food or cook raw food. It is intended for use in commercial
foodservice operations only. It is not intended for household, industrial
or laboratory use.
20 and 26 Inch Cheese Melters
JW2 Model
Item No.
CM2-12020
CM2-2302003
CM2-2302002
CM2-12026
CM2-2302603
CM2-2302602
CLEARANCE AND ENVIRONMENT REQUIREMENTS
Do not place oven on surfaces or near walls, partitions or kitchen
furniture unless they are made of non-combustible material or clad with
non-combustible heat-insulating material. Ovens must not be used near
or below curtains and other combustible materials.
Do not place the oven adjacent to a heat producing appliance.
Allow a minimum of 8 inches (20.3 cm) of clearance on the left and
right sides of the oven.
©
2018 The Vollrath Company L.L.C.
Operator's Manual
Models JW1 and JW2
JW1 Model
Overall
Model
Width
Voltage
120
20"
JW1
(50.8 cm)
230
120
26"
JW2
(66 cm)
220-240
Part No. 351018-1 ml
Plug
NEMA 5-15
UK
Schuko
NEMA 5-15
UK
Schuko
12/26/18

Publicité

loading

Sommaire des Matières pour Vollrath Salamandres JW1

  • Page 1 Operator’s Manual 20 and 26 Inch Cheese Melters Models JW1 and JW2 Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
  • Page 2 SET UP BEFORE FIRST USE Clean the oven. See “Cleaning” on page 3. Install the Shelf Slide the shelf into the oven. OPERATION FEATURES CAUTION Burn Hazard Do not touch the equipment while it is heating or operating. Hot surfaces can burn skin. Preheat 1.
  • Page 3 6. Press the On/Off switch to the ON (|) position. 7. Press the reset button. 8. If the problem persists call Vollrath Technical Services. Inspect the fan blades to see if they are dirty. 1. Press the On/Off switch to the OFF (O) position.
  • Page 4 Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty. The warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
  • Page 5 Salamandres, 20 et 26 pouces (51 et 66 cm) Modèles JW1 et JW2 Merci d’avoir acheté cet appareil Vollrath. Avant d’utiliser cet appareil, lisez et familiarisez-vous avec le mode d’emploi et les consignes d’utilisation qui suiven. CONSERVEZ CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.
  • Page 6 INSTALLATION AVANT LA PREMIÈRE UTILISATION Nettoyez le four. Voir « Nettoyage », à la page 3. Installation de l'étagère Placez l'étagère dans le four. MODE D'EMPLOI CARACTÉRISTIQUES ATTENTION Risque de brûlure Ne touchez pas l’appareil en cours de chauffage ou de fonctionnement.
  • Page 7 6. Appuyez sur l'interrupteur de marche/arrêt en position Marche (|). 7. Appuyez sur le bouton de réarmement. 8. Si le problème persiste, contactez le support technique Vollrath. Inspectez les pales du ventilateur pour voir si elles ne sont pas sales.
  • Page 8 La garantie ne s'applique pas aux produits achetés pour un usage personnel, familial ou ménager, et la Vollrath Company LLC ne propose aucune garantie écrite aux acheteurs pour de telles utilisations.
  • Page 9 Derretidores de queso, 20 y 26 pulgadas (51 y 66 cm) Modelos JW1 y JW2 Gracias por comprar este equipo Vollrath. Antes de usar el equipo, lea y familiarícese con las siguientes instrucciones de operación y seguridad. CONSERVE ESTAS INSTRUCCIONES COMO REFERENCIA PARA EL FUTURO.
  • Page 10 PREPARACIÓN ANTES DEL PRIMER USO Limpie el horno. Consulte “Limpieza” en la página 3. Instale la repisa Coloque la repisa en el horno. FUNCIONAMIENTO CARACTERÍSTICAS PRECAUCIÓN Peligro de quemaduras No toque el equipo mientras este esté calentando o funcionando. Las superficies calientes pueden quemar la piel. Precalentar 1.
  • Page 11 8. Si el problema persiste, comuníquese con los Servicios de asistencia técnica de Vollrath. Puede que uno o más elementos Comuníquese con los Servicios de asistencia técnica de Vollrath. se hayan quemado. Puede haber un problema con el interruptor de calor.
  • Page 12 3. Si el representante determina que el problema requiere servicio profesional, le ayudará a localizar un centro de servicio autorizado. 4. Póngase en contacto con el centro de servicio autorizado y lleve el equipo a dicho centro. Vollrath cubrirá el costo de la reparación y/o reemplazo de las piezas defectuosas dentro del período de garantía del equipo.